<?php
namespace catchAdmin\hydraulic\controller;
error_reporting(1);
use catchAdmin\equipment\model\EquipmentType;
use catcher\base\CatchRequest as Request;
use catcher\CatchResponse;
use catcher\base\CatchController;
use catchAdmin\hydraulic\model\HydEquipment as hydEquipmentModel;
use catchAdmin\hydraulic\model\Hydraulic;
use catchAdmin\hydraulic\model\Wrench;
use catchAdmin\system\model\SysDictData;
use catcher\base\CatchRequest;
use PhpParser\Node\Stmt\Catch_;
use think\facade\Db;

class HydEquipment extends CatchController
{
    protected $hydEquipmentModel;
    
    public function __construct(HydEquipmentModel $hydEquipmentModel)
    {
        $this->hydEquipmentModel = $hydEquipmentModel;
    }
    
    /**
     * 列表
     * @time 2022年06月21日 11:02
     * @param Request $request 
     */
    public function index(Request $request) : \think\Response
    {
        return CatchResponse::paginate($this->hydEquipmentModel->getList());
    }
    
    /**
     * 保存信息
     * @time 2022年06月21日 11:02
     * @param Request $request 
     */
    public function save(Request $request) : \think\Response
    {
        $data = $request->post();
        $hydraulic = null;
        $wrench = null;
        $hydequ=[
        // 物料号
        'material_number'=>$data['material_number'],
        // 设备类别
        'equipment_type'=>$data['equipment_type'],
        // 工具名称
        'name'=>$data['name'],
        // 设备型号
        'equipment_model'=>$data['equipment_model'],
        // 发放单位
        'issue_unit'=>$data['issue_unit'],
        // 固定资产编号
        'fixed_asset_number'=>$data['fixed_asset_number'],
        // 类固定资产编号
        'fixed_asset_number2'=>$data['fixed_asset_number2'],
        // 序列号
        'serial_number'=>$data['serial_number'],
        // 出厂编号
        'factory_number'=>$data['factory_number'],
        // 上次校验时间
        'check_last_time'=>$data['check_last_time'],
        // 下次校验时间
        'check_next_time'=>$data['check_next_time'],
        // 校验状态
        'check_status'=>$data['check_status'],
        // 状态
        'status'=>$data['status'],
        'address'=>$data['address'],
        'longitude'=>$data['longitude'],
        'latitude'=>$data['latitude']
        ];
        Db::startTrans();
        try{
        $id = $this->hydEquipmentModel->storeBy($hydequ);
        if($data['equipment_type']==2)
        {
            $hydraulic=[
                 // 编号
                'number'=>$data['number'],
                // 所属部门
                'department_id'=>$data['department_id'],
                'remark'=>$data['remark']?$data['remark']:'',
                'max_pressure'=>$data['max_pressure'],
                'min_pressure'=>$data['min_pressure'],
                'imei'=>$data['imei'],
                'effective_period'=>$data['effective_period'],
                //设备的id
                'eq_id'=>$id
            ];

            Hydraulic::create($hydraulic);
        }
        //保存扳手
        if($data['equipment_type']==3||$data['equipment_type']==4)
        {
            
            $wrench = [
                // 编号
                'number'=>$data['number'],
                //设备id
                'eq_id'=>$id,
                // 所属部门
                'department_id'=>$data['department_id'],
                'remark'=>$data['remark']?$data['remark']:'',
                'pressure'=>$data['pressure'],
                'angle_sensor'=>$data['angle_sensor'],
                // 扭矩
                'torque'=>$data['torque'],
            ];
            Wrench::create($wrench);
        }
    }catch(\Exception $e)
    {
        Db::rollback();
        return  CatchResponse::fail($e->getMessage());
    }
        Db::commit();
        return CatchResponse::success();
    }
    
    /**
     * 读取
     * @time 2022年06月21日 11:02
     * @param $id 
     */
    public function read($id) : \think\Response
    {
        return CatchResponse::success($this->hydEquipmentModel->findBy($id));
    }
    
    /**
     * 更新
     * @time 2022年06月21日 11:02
     * @param Request $request 
     * @param $id
     */
    public function update(Request $request, $id) : \think\Response
    {
        $data = $request->post();
        $hydraulic = null;
        $wrench = null;
        $hydequ=[
        // 物料号
        'material_number'=>$data['material_number'],
        // 设备类别
        'equipment_type'=>$data['equipment_type'],
        // 工具名称
        'name'=>$data['name'],
        // 设备型号
        'equipment_model'=>$data['equipment_model'],
        // 发放单位
        'issue_unit'=>$data['issue_unit'],
        // 固定资产编号
        'fixed_asset_number'=>$data['fixed_asset_number'],
        // 类固定资产编号
        'fixed_asset_number2'=>$data['fixed_asset_number2'],
        // 序列号
        'serial_number'=>$data['serial_number'],
        // 出厂编号
        'factory_number'=>$data['factory_number'],
        // 上次校验时间
        'check_last_time'=>$data['check_last_time']?strstr($data['check_last_time'],'-')?strtotime($data['check_last_time']):$data['check_last_time']:'',
        // 下次校验时间
        'check_next_time'=>$data['check_next_time']?strstr($data['check_next_time'],'-')?strtotime($data['check_next_time']):$data['check_next_time']:'',
        // 校验状态
        'check_status'=>$data['check_status'],
        // 状态
        'status'=>$data['status'],
        'address'=>$data['address'],
        'longitude'=>$data['longitude'],
        'latitude'=>$data['latitude']
        ];


        if($data['equipment_type']==2)
        {
            $hydraulic=[
                 // 编号
                'number'=>$data['number'],
                // 所属部门
                'department_id'=>$data['department_id'],
                //备注
                'remark'=>$data['remark'],
                'max_pressure'=>$data['max_pressure'],
                'min_pressure'=>$data['min_pressure'],
                'imei'=>$data['imei'],
                'effective_period'=>$data['effective_period'],
                //设备的id
                'eq_id'=>$id
            ];
            Hydraulic::where('eq_id',$id)->update($hydraulic);
        }
        //保存扳手
        if($data['equipment_type']==3||$data['equipment_type']==4)
        {
            
            $wrench = [
                // 编号
                'number'=>$data['number'],
                //设备id
                'eq_id'=>$id,
                // 所属部门
                'department_id'=>$data['department_id'],
                'remark'=>$data['remark'],
            
                'pressure'=>$data['pressure'],
                'angle_sensor'=>$data['angle_sensor'],
                // 扭矩
                'torque'=>$data['torque'],
            ];
            Wrench::where('id',$data['list']['id'])->update($wrench);
        }
        return CatchResponse::success($this->hydEquipmentModel->updateBy($id, $hydequ));
    }
    
    /**
     * 删除
     * @time 2022年06月21日 11:02
     * @param $id
     */
    public function delete($id) : \think\Response
    { 
        $data = array();
        $where = [];
        if(is_array($id))
        {
            $where[]=['id','in',$id];
          $data = $this->hydEquipmentModel->where($where)->select()->toArray();
        }
        else
        {
            $list =  $this->hydEquipmentModel->where('id',$id)->find();
            $data[] = $list;
        }
        Db::startTrans();
        try{
            foreach($data as $item)
            {
                if($item['equipment_type']==2)
                {
                    Hydraulic::where('eq_id','=',$item['id'])->delete();
                }
                if($item['equipment_type']==3||$item['equipment_type']==4)
                {
                    Wrench::where('eq_id','=',$item['id'])->delete();
                }

            }
           
            $this->hydEquipmentModel->deleteBy($id,true);

        }catch (\Exception $e)
        {
            Db::rollback();
            return  CatchResponse::fail($e->getMessage());
        }
        Db::commit();
        return CatchResponse::success();
    }
    /**
     * @Descripttion: 获取设备状态和校验状态
     * @name: likang
     * @return {*}
     */    
    public function getHydEquipmentType(Request $request)
    {
       $data=$request->get();
       $code =  $data['code'];
        $sysDict = new SysDictData();
        $list =  $sysDict->getTypesByCodeWithRemark($code,'');
        return CatchResponse::success($list);
        
    }
    /**
     * 根据设备类别统计每个设备的总数
     */
    public function getTotalByEquipmentType($id)
    {
        
        $list = EquipmentType::where('pid',$id)->order('order asc')->field('id,name')->limit(4)->select();
        foreach($list as $key=>$value)
        {
            $list[$key]['total']=$this->hydEquipmentModel->where('equipment_type',$value['id'])->count();
        }
       return CatchResponse::success($list);

    }
    
}