station-test-api/catch/hydraulic/controller/HydEquipment.php

<?php

namespace catchAdmin\hydraulic\controller;

error_reporting(1);

use catchAdmin\api\model\PublishAck;
use catchAdmin\equipment\model\EquipmentType;
use catcher\base\CatchRequest as Request;
use catcher\CatchResponse;
use catcher\base\CatchController;
use catchAdmin\hydraulic\model\HydEquipment as hydEquipmentModel;
use catchAdmin\hydraulic\model\Hydraulic;
use catchAdmin\hydraulic\model\Wrench;
use catchAdmin\system\model\SysDictData;
use catcher\base\CatchRequest;
use PhpOffice\PhpSpreadsheet\IOFactory;
use PhpParser\Node\Stmt\Catch_;
use think\facade\Db;

class HydEquipment extends CatchController
{
    protected $hydEquipmentModel;

    public function __construct(HydEquipmentModel $hydEquipmentModel)
    {
        $this->hydEquipmentModel = $hydEquipmentModel;
    }

    /**
     * 列表
     * @time 2022年06月21日 11:02
     * @param Request $request 
     */
    public function index(Request $request): \think\Response
    {
        return CatchResponse::paginate($this->hydEquipmentModel->getList());
    }

    /**
     * 保存信息
     * @time 2022年06月21日 11:02
     * @param Request $request 
     */
    public function save(Request $request): \think\Response
    {
        $data = $request->post();
        $hydraulic = null;
        $wrench = null;
        $hydequ = [
            // 物料号
            'material_number' => $data['material_number'],
            // 设备类别
            'equipment_type' => $data['equipment_type'],
            // 工具名称
            'name' => $data['name'],
            // 设备型号
            'equipment_model' => $data['equipment_model'],
            // 发放单位
            'issue_unit' => $data['issue_unit'],
            // 固定资产编号
            'fixed_asset_number' => $data['fixed_asset_number'],
            // 类固定资产编号
            'fixed_asset_number2' => $data['fixed_asset_number2'],
            // 序列号
            'serial_number' => $data['serial_number'],
            // 出厂编号
            'factory_number' => $data['factory_number'],
            // 上次校验时间
            'check_last_time' => $data['check_last_time'],
            // 下次校验时间
            'check_next_time' => $data['check_next_time'],
            // 校验状态
            'check_status' => $data['check_status'],
            // 状态
            'status' => $data['status'],
            'address' => $data['address'],
            'longitude' => $data['longitude'],
            'latitude' => $data['latitude']
        ];
        Db::startTrans();
        try {
            $id = $this->hydEquipmentModel->storeBy($hydequ);
            if ($data['equipment_type'] == 2) {
                $hydraulic = [
                    // 编号
                    'number' => $data['number'],
                    // 所属部门
                    'department_id' => $data['department_id'],
                    'remark' => $data['remark'] ? $data['remark'] : '',
                    'max_pressure' => $data['max_pressure'],
                    'min_pressure' => $data['min_pressure'],
                    'imei' => $data['imei'],
                    'effective_period' => $data['effective_period'],
                    //设备的id
                    'eq_id' => $id
                ];
                $hyd_exist =  Hydraulic::where('imei', $data['imei'])->find();
                if ($hyd_exist) {
                    Db::rollback();
                    return  CatchResponse::fail('imei号已存在');
                }
                Hydraulic::create($hydraulic);
            }
            //保存扳手
            if ($data['equipment_type'] == 3 || $data['equipment_type'] == 4) {

                $wrench = [
                    // 编号
                    'number' => $data['number'],
                    //设备id
                    'eq_id' => $id,
                    // 所属部门
                    'department_id' => $data['department_id'],
                    'remark' => $data['remark'] ? $data['remark'] : '',
                    'min_pressure' => $data['min_pressure'],
                    'max_pressure' => $data['max_pressure'],
                    'min_torque' => $data['min_torque'],
                    'max_torque' => $data['max_torque'],
                    'angle_sensor' => $data['angle_sensor'],
                    'angular_resolution' => $data['angular_resolution']

                ];

                $wrench_exist =  Wrench::where('number', $data['number'])->find();
                if ($wrench_exist) {
                    Db::rollback();
                    return  CatchResponse::fail('扳手编号已存在');
                }
                Wrench::create($wrench);
            }
        } catch (\Exception $e) {
            Db::rollback();
            return  CatchResponse::fail($e->getMessage());
        }
        Db::commit();
        return CatchResponse::success();
    }

    /**
     * 读取
     * @time 2022年06月21日 11:02
     * @param $id 
     */
    public function read($id): \think\Response
    {
        return CatchResponse::success($this->hydEquipmentModel->findBy($id));
    }

    /**
     * 更新
     * @time 2022年06月21日 11:02
     * @param Request $request 
     * @param $id
     */
    public function update(Request $request, $id): \think\Response
    {
        $data = $request->post();
        $hydraulic = null;
        $wrench = null;
        $hydequ = [
            // 物料号
            'material_number' => $data['material_number'],
            // 设备类别
            'equipment_type' => $data['equipment_type'],
            // 工具名称
            'name' => $data['name'],
            // 设备型号
            'equipment_model' => $data['equipment_model'],
            // 发放单位
            'issue_unit' => $data['issue_unit'],
            // 固定资产编号
            'fixed_asset_number' => $data['fixed_asset_number'],
            // 类固定资产编号
            'fixed_asset_number2' => $data['fixed_asset_number2'],
            // 序列号
            'serial_number' => $data['serial_number'],
            // 出厂编号
            'factory_number' => $data['factory_number'],
            // 上次校验时间
            'check_last_time' => $data['check_last_time'] ? strstr($data['check_last_time'], '-') ? strtotime($data['check_last_time']) : $data['check_last_time'] : '',
            // 下次校验时间
            'check_next_time' => $data['check_next_time'] ? strstr($data['check_next_time'], '-') ? strtotime($data['check_next_time']) : $data['check_next_time'] : '',
            // 校验状态
            'check_status' => $data['check_status'],
            // 状态
            'status' => $data['status'],
            'address' => $data['address'],
            'longitude' => $data['longitude'],
            'latitude' => $data['latitude']
        ];

        if ($data['equipment_type'] == 2) {
            $hydraulic = [
                // 编号
                'number' => $data['number'],
                // 所属部门
                'department_id' => $data['department_id'],
                //备注
                'remark' => $data['remark'],
                'max_pressure' => $data['max_pressure'],
                'min_pressure' => $data['min_pressure'],
                'imei' => $data['imei'],
                'effective_period' => $data['effective_period'],
                //设备的id
                'eq_id' => $id
            ];
            $hyd_exist =  Hydraulic::where('imei', $data['imei'])->where('eq_id', '<>', $id)->find();
            if ($hyd_exist) {
                Db::rollback();
                return  CatchResponse::fail('imei号已存在');
            }
            $bool = Hydraulic::where('eq_id', $id)->find();
            if ($bool) {
                Hydraulic::where('eq_id', $id)->update($hydraulic);
            } else {
                Hydraulic::create($hydraulic);
            }
        }
        //保存扳手
        if ($data['equipment_type'] == 3 || $data['equipment_type'] == 4) {

            $wrench = [

                // 编号
                'number' => $data['number'],
                //设备id
                'eq_id' => $id,
                // 所属部门
                'department_id' => $data['department_id'],
                'remark' => $data['remark'],
                'min_pressure' => $data['min_pressure'],
                'max_pressure' => $data['max_pressure'],
                'min_torque' => $data['min_torque'],
                'max_torque' => $data['max_torque'],
                'angular_resolution' => $data['angular_resolution'],
                'angle_sensor' => $data['angle_sensor'],
                // 扭矩
            ];
            $wrench_exist =  Wrench::where('number', $data['number'])->where('id', '<>', $data['list']['id'])->find();
            if ($wrench_exist) {
                Db::rollback();
                return  CatchResponse::fail('扳手编号已存在');
            }
            $bool = Wrench::where('eq_id', $id)->find();
            if ($bool) {
                Wrench::update($wrench, ['eq_id' => $id]);
            } else {
                Wrench::create($wrench);
            }
        }
        return CatchResponse::success($this->hydEquipmentModel->updateBy($id, $hydequ));
    }

    /**
     * 删除
     * @time 2022年06月21日 11:02
     * @param $id
     */
    public function delete($id): \think\Response
    {
        $data = array();
        $where = [];
        if (is_array($id)) {
            $where[] = ['id', 'in', $id];
            $data = $this->hydEquipmentModel->where($where)->select()->toArray();
        } else {
            $list =  $this->hydEquipmentModel->where('id', $id)->find();
            $data[] = $list;
        }
        Db::startTrans();
        try {
            foreach ($data as $item) {
                if ($item['equipment_type'] == 2) {
                    Hydraulic::where('eq_id', '=', $item['id'])->delete();
                }
                if ($item['equipment_type'] == 3 || $item['equipment_type'] == 4) {
                    $wrench =  Wrench::where('eq_id', '=', $item['id'])->find();
                    $wrench->delete();
                }
            }
            $this->hydEquipmentModel->deleteBy($id, true);
        } catch (\Exception $e) {
            Db::rollback();
            return  CatchResponse::fail($e->getMessage());
        }
        Db::commit();
        return CatchResponse::success();
    }
    /**
     * @Descripttion: 获取设备状态和校验状态
     * @name: likang
     * @return {*}
     */
    public function getHydEquipmentType(Request $request)
    {
        $data = $request->get();
        $code =  $data['code'];
        $sysDict = new SysDictData();
        $list =  $sysDict->getTypesByCodeWithRemark($code, '');
        return CatchResponse::success($list);
    }
    /**
     * 根据设备类别统计每个设备的总数
     */
    public function getTotalByEquipmentType($id)
    {

        $list = EquipmentType::where('pid', $id)->order('order desc')->field('id,name')->limit(4)->select();
        foreach ($list as $key => $value) {
            $list[$key]['total'] = $this->hydEquipmentModel->where('equipment_type', $value['id'])->count();
        }
        return CatchResponse::success($list);
    }
    /**
     * @Descripttion: 获取不同类型的设备
     * @name: likang
     * @return {*}
     */
    public function getAllHydEqu(Request $request)
    {
        $data = $request->get();
        $type = $data['type'];

        $list =  $this->hydEquipmentModel->where('equipment_type', $type)->field('id as value,name as text')->select();
        return CatchResponse::success($list);
    }



    public function importExcel(Request $request)
    {

        $map = [
            ['key' => 'A', 'value' => 'material_number'],
            ['key' => 'C', 'value' => 'equipment_type'],
            ['key' => 'D', 'value' => 'name'],
            ['key' => 'E', 'value' => 'equipment_model'],
            ['key' => 'F', 'value' => 'issue_unit'],
            ['key' => 'G', 'value' => 'fixed_asset_number'],
            ['key' => 'H', 'value' => 'fixed_asset_number2'],
            ['key' => 'I', 'value' => 'serial_number'],
            ['key' => 'J', 'value' => 'factory_number'],
            ['key' => 'K', 'value' => 'check_last_time'],
            ['key' => 'L', 'value' => 'check_next_time'],
            ['key' => 'M', 'value' => 'check_status'],
            ['key' => 'N', 'value' => 'status'],

        ];
        //过滤
        $func = function ($data) {

            $data['equipment_type'] = EquipmentType::where('pid', '<>', 0)->where('name', $data['equipment_type'])->value('id');
            if ($data['check_status'] == '已校验') {
                $data['check_status'] = 2;
            } else if ($data['check_status'] == '待校验') {
                $data['check_status'] = 1;
            } else if ($data['check_status'] == '已报废') {
                $data['check_status'] = -1;
            } else {
                $data['check_status'] = 1;
            }

            if ($data['status'] = '使用中') {
                $data['status'] = 4;
            } else if ($data['status'] == '待维修') {
                $data['status'] = -1;
            } else if ($data['status'] == '在途') {
                $data['status'] = 1;
            } else if ($data['status'] == '待校验') {
                $data['status'] = 2;
            } else if ($data['status'] == '备用') {
                $data['status'] = 3;
            }


            return $data;
        };
        return importExcel($request, $map, $this->hydEquipmentModel, $func);
    }
    /**
     * @Descripttion: 查看上传的日志
     * @name: likang
     * @return {*}
     */
    public function SelectLogByImei(Request $request)
    {
        //获取设备的imei号
        $imei = $request->get('imei');
        $pub_ack  = new PublishAck();

        $list =  Db::name('publish_ack')->where('Imei', $imei)->field('id,PublishVersion,AddTime,Succ,AckTime,Imei')->order('PublishVersion', 'desc')->select()->toArray();
        foreach ($list as $key => $item) {
            //时间
            $list[$key]['AddTime'] = date('Y-m-d H:i:s', substr($item['AddTime'], 0, 10));
            $list[$key]['AckTime'] = date('Y-m-d H:i:s', substr($item['AckTime'], 0, 10));
        }
        return CatchResponse::success($list);
    }
    /**
     * @Descripttion: 获取日志详情
     * @name: likang
     * @param {Request} $request
     * @return {*}
     */
    public function getLogDetail(Request $request)
    {
        $type = $request->get('type');
        $id = $request->get('id');
        $data = null;
        if ($type == 1) {
            $data = Db::name('publish_ack')->where('id', $id)->value('PublishContent');
            $data = optimize_json($data);
            $data = json_decode($data, true);
            if (json_last_error() != 0) {
                return CatchResponse::fail(json_last_error_msg());
            }
        } else {
            $data = Db::name('publish_ack')->where('id', $id)->value('Extra');
            $data = optimize_json($data);
        }


        return CatchResponse::success($data);
    }
}